a-98 dimensions are shown: inches (mm) specifications and dimensions subject to change www.ck-components.com a pu shbu tt on ne-18 series mains / power switches features/benefits ? chassis or panel mount ? various buttons ? various contact configurations ? rohs compliant t ypical applications ? mains/power switching ? consumer electronics ? audio equipment ? digital products specifications power contact: switching power max. ac/dc: NE18: 1500/100 w, NE18ctii: 1000/100 w; ac (inductive cos w =0.6): NE18: 900w, NE18ctii: 600w. switching vol tage max. ac/dc: 250/100v switching current max. ac/dc ac (inductive cos w =0.6): NE18: 6 a 2 ) 4 )/1 a, NE18ctii: 4 a 2 )/1 a inrush current max. ac 1 ): NE18: 36 a, NE18ctii: 64 a dielectric strength (50 hz, 1 min.): 2000 v operating life at max. load and at max. inrush current: ^10 4 operations 5 ) contact resistance: initial: 50m ; after 10 4 operations: 70m . insulation resistance: ^10 12 chassis Cnearest contact; ^10 12 mains contact Cmains contact; ^10 12 mains contact C mains contact after 10 4 operations. low vol t age cont act : switching power max.: 12w switching voltage max.: 24v switching current max.: 0.5a total travel: 4.7mm (.185 inch) latching travel: 3.3mm (.130 inch) operating force: without auxiliary low voltage contacts: NE18: 7n (700 grams); NE18ctii: 9.5n (950 grams). with auxiliary low voltage contacts: NE18: 8n (800 grams); NE18ctii: 11n (1100 grams). sealing: dust pr oof. materials housing, actuator & terminal board: thermoplastic polyester (ul 94v-0). movable contact: silver nickel alloy, silver plated. fixed cont acts: silver nickel alloy , silver plated. common cont acts & terminals: copper alloy , silver plated. return spring: music wire. note: all models ar er rohs compliant and compatible. note: specifications and materials listed above are for switches with standard options. for information on specific and custom switches, consult customer service center . build-a-switch to order, simply select desired option from each category and place in the appropriate box. available options are shown and described on pages a-99 thru a- 1 06. for additional options not shown in catalog, consult customer service center . if requesting only a switch, select the switch as noted below. buttons are sold separately. designation NE18 ne1b zNE18 cental mounted ne1b single station chassis 01 with .094 mounting holes (none) no chassis 02 with 4-40 ta pped mounting holes 03 special chassis (consult factory) dress nut* *central mounted zNE18 series only (none) no dress nut b black c chrome mechanical function oa momentary ee alternate (push-push) contact arrangement NE18 code # - see list
a-99 dimensions are shown: inches (mm) specifications and dimensions subject to change www.ck-components.com pu shbu tt on a third angle projection ne-18 series mains / power switches style f01 fmr f02 fg* f12 fsc f13 fsd f14 fu12 f15 fsb f16 fe f19 fa f21 f001 button color 01 black 02 white 03 red 04 light gray order code - buttons solid buttons mechanical indicator buttons style f01 fa100 f02 fa101 f07 fa120 f08 fa2o1 f11 fa200* shell color 01 black out position color 01 black in position color 02 white 06 yellow 07 blue 08 green 12 orange *button options for central mounting configurations, use g?or central mount with chrome dress nut, use a200for central mount with black dress nut. button removal a button of a push-push switch should only be removed in the ff?on-l-tching position. 0.39 4 (10 ) 0.49 2 (12 ,5 ) (a) (r ) (r ) p 1 p 2 (a ) 0.39 4 (10 ) 0.49 4 (12 ,5 5) 0.23 6 (6 ) 1, 5 0 ,1 ne 1 8 2u 0.23 6 (6 ) designation & switches with standard options NE1838ee 0.7 (17 ,8 ) 1.09 (27 ,8 ) 0.406 (21 ,4 ) 0.335 (8, 5) 0.1 3 (3 ,3 ) 0.394 (1 0) 0.494 (1 2,5) 0.583 (1 4,8) 0.709 (1 8) 0.315 (8 ) 0.197 (5 )
a-100 dimensions are shown: inches (mm) specifications and dimensions subject to change www.ck-components.com a pu shbu tt on third angle projection ne-18 series mains / power switches designation & switches with standard options NE1848ee NE1839ee pc mo unting 0.39 4 (1 0) 0.49 4 (1 2) 0.05 1 2 (? 1, 3) 0.118 (? 3) 0.59 1 (1 5) 0.7 (17 ,8 ) 0.23 6 (6) 0.7 (1 7, 8) 1.09 (2 7, 8) tra ve l 3,4 (0.13) max. 4 ,7 ( 0.18 5) 0.406 (2 1, 4) 0.23 6 (6 ) 0.03 9 4 (1 ) 1) 2) 0.335 (8 ,5 ) 1) 0.15 7 (0 ,4 ) 0.118 (3 ) 1.24 (3 1, 5) 0.23 6 (6, 4) 0.13 (3 ,3 ) 0.58 3 (1 4, 8) 0.70 9 (18 ) 0.31 5 (8) 0.19 7 (5 ) 0.23 6 (6 ) 0.23 6 (6)
designation & switches with standard options a-101 dimensions are shown: inches (mm) specifications and dimensions subject to change www.ck-components.com pu shbu tt on a ne-18 series mains / power switches third angle projection zNE1838eecf0201 pc mo unting
a-102 dimensions are shown: inches (mm) specifications and dimensions subject to change www.ck-components.com a pu shbu tt on third angle projection ne-18 series mains / power switches contact arrangement mechanical function momentary alternate (push-push) oa ee function option code 37 NE18 2ax dpst 38 NE18 2ux dpdt 51 2u + NE18 2ax dpst* 52 (4a/64) NE18ctii 2ax dpst 39 2u + NE18 2ux dpdt* 41 NE18 2ap dpst 42 NE18 2up dpdt 43 NE18 2a w dpst 44 NE18 2uw dpdt 45 NE18 2asx dpst electrical circuit style option code contact capacity and availability 46 NE18 2usx dpdt 47 NE18 2asp dpst 48 NE18 2usp dpdt 49 NE18 2asw dpst 50 NE18 2usw dpdt 53 (4a/64) 2u + NE18ctii 2ax dpst 54 2u + NE18 2a w dpst 55 2u + NE18 2ap dpst 56 2u + NE18 2uw dpdt 57 2u + NE18 2up dpdt electrical circuit style option code contact capacity and availability * 2u + denotes auxiliary set of low current contacts dpdt 2a = dpst 2u = dpdt s = snap-in mountingx = solder lug/pc pins w = solder lugs only p = pc pins only notes 1. contact plating is silver on all power switches. 2. the electrical function is break before make (bbm) on all power switches. 3. the terminals will be epoxy sealed. 1) a = make contact, r = break contact, u = changeover contact, m = vde sign for switches with a contact spacing (air gap) < 3mm (.118 inch) according to vde 0630/cee 24. 2) with 2a mains contacts: mounting only by pc pins is not suf ficient. 3) bsi only for 2u mains contacts. vde, ul ii > 3mm (.118 inch) 2u 2a 2 NE18ctii vde, ul i > 3mm ( m) (.118 inch) 2u 2a 2 2u NE18 vde, ul ii > 3mm (.118 inch) 2u 2a 2 NE18 approv als protection class (cee 24) cont act sp acing possible contact arrangement power contacts 1 auxiliary contacts type
a-103 dimensions are shown: inches (mm) specifications and dimensions subject to change www.ck-components.com pu shbu tt on a third angle projection ne-18 series mains / power switches single station chassis dress nut panel cutout panel cutout 03 special chassis (consult factory) 02 with 4-40 t apped mounting holes 01 with .094 mounting holes (none) no chassis c chrome b black (none) no dress nut note: a vailable with zNE18 designation and fg button. note: a vailable with zNE18 designation and f a200 buttons.
a-104 dimensions are shown: inches (mm) specifications and dimensions subject to change www.ck-components.com a pu shbu tt on third angle projection ne-18 series mains / power switches solid button f19 fa f16 fe f14 fu12 f13 fsd f12 fsc f02 fg f01 fmr f15 fsb style 01 black 02 white 03 red 04 lt. gray color option code
a-105 dimensions are shown: inches (mm) specifications and dimensions subject to change www.ck-components.com pu shbu tt on a third angle projection ne-18 series mains / power switches solid button mechanical button f01 f a100 f21 f001 f02 f a101 01 black 02 white 03 red 04 l t. gray black/chrome 09 (f03,f06 & f07 buttons only color option code style color shell color in position color style out position color style style
a-106 dimensions are shown: inches (mm) specifications and dimensions subject to change www.ck-components.com a pu shbu tt on third angle projection ne-18 series mains / power switches mechanical button style shell color out position color in position color 01 black 01 black f08 fa201 f11 fa200 style shell color out position color in position color 02 white 06 yellow 07 blue 08 green 12 orange color option code
|
